Orbi is a networking device that works as router and extender. It is distributed by Netgear brand. It is easy to connect to your home modem via Ethernet cable.
But here we will not discuss about ay Orbi setup through orbilogin.net we will cover a query that is Orbi satellite not connecting to the router wirelessly.
We will start by sharing the reasons of the mentioned technical issue and also provide solutions and troubleshooting tips to fix the problem. So, let’s start this informative article straight away.
Reasons Why Orbi not Connecting to Satellite?
There are many reasons why your Orbi is not connecting to the satellite, which are written below in this section.
- Networking interruptions are caused by electronic devices like microwave ovens can be a reason why Orbi devices are not connecting to each other.
- One other causing factor of the mentioned issue is placing satellite out of the reach of Orbi router in your house.
- Modem to router connection is not established rightly and router is not receiving internet signals can cause this issue.
- Damaged Ethernet cable and power cord connected to your router or satellite can be a reason why your router to the satellite.
Now, have a look how you can easily solve this Orbi satellite not connecting to router problem with the help of some troubleshooting tips and solutions.
Solutions to Fix Connection Technical Issue
Here, in this full of troubleshooting tips section, you will learn how to make a strong connection between the Orbi router and satellite.
1.Make Sure There is no Interruption
The electronic devices like microwave oven can interrupt your router internet signals. So, you have to check and make sure there is no electronic device near to the Orbi router or satellite. If you find one close to the networking device then replace the device to an optimal location in your house.
2.Make Router to Modem Link Strong
Router to modem connection must be correct and make sure router is receiving internet signals from the modem. Check the Ethernet cable is inserted in router’s WAN port and LAN port of the modem, if not then pull it out and connect in correct ports.
3.Sync Router and Satellite Near to Each Other
If your Orbi satellite is not placed near to the router, then you can face troubles like above mentioned. So, put the satellites close to the router and then press the sync button to connect them each other.
4.Check and Replace Damaged Cables
Ethernet cable and power cord that are use to connect other network devices and supply power to the router or satellites can be damaged and cause multiple problems. So, check and replace any damaged cables connected to the Orbi.
5.Reboot Orbi Router and Satellite
If above written tips and solutions not working, then you must reboot the router as well as satellite.
- To restart the router, you have to find and hit the power On/Off button twice.
- To reboot the satellite. You have to plug its power adaptor out and plug it again in the wall socket.
After dispelling the problem, you must access the orbilogin interface and check that there is any update of Orbi firmware.
Last Note
Here, you have learned reasons why your Orbi is not syncing with the satellite and how to resolve it with the help of some of tips and solutions. Hope, you have dispelled the Orbi connection problem easily using this article.
