If you want to fix the Epson L3150 repeated paper jam error, then try out the different methods shared in this article.
The Epson L3150 is a standard Epson printer that can do more than one thing. It has 182 nozzles for printing in black and 60 nozzles for printing in color. Its smallest droplet size is about three picoliters, and it has a system that lets you change the size of the droplets. This printer also comes with an internal driver that lets you get the most out of it and works with a number of different operating systems.
However, if you want to make the most out of your printer, you need to perform the Epson L3150 driver download process. Outdated drivers are amongst the most common reasons why your Epson printer is showing paper jam errors. Therefore, today with the help of this article, we are going to provide some of the most effective and efficient ways to get rid of this issue easily.
Method To Fix Epson Repeated Paper Jam Error
Here are some tips and tricks that you can try out to resolve this paper jam error on your Epson printer.
Method1: Check Your Printer’s Screen
To avoid this step, make sure your printer has a screen. An error message or prompt will be shown on the screen of your Epson printer if there is a paper jam. For example, “Paper jammed in Rear side” or “Paper jammed inside” are common reminders of where the paper is stuck. Get the stuck paper out. To simply remove the paper jam error notice, just follow the on-screen instructions.
Step 1: Remove all visible paper.
Step 2: follow the prompts to remove any jammed paper.
Step 3: Then, press the Start button on your printer.
Step 4: Wait for some time and your printer will check for any jammed paper. Then, finally it will start printing again.
If performing this method doesn’t help you fix the issue, then move on with the next one shared below.
Method2: Check The Printer’s Indicator Light
When your Epson printer detects a paper jam, it will flash its lights in a certain sequence and display trouble warnings. When troubleshooting a paper jam, keep an eye out for any symbols or lights that flash on the printer. If you aren’t sure where to look for a problem, pull out your Epson printer handbook.
When it comes to Epson printers, a paper jam often happens somewhere along the paper route, such as the back paper cassette, the paper tray, or even within the printer itself. If the back paper cassette or tray is stuck, gently remove the paper. After that, take out the scanner unit from the Epson printer, open the lid, and carefully remove any paper that may be within. Set the scanner aside, shut the lid, and then click the “Copy” button to start printing again.
Read More: Why is my HP Printer Printing Blank Pages When It Has Ink?
Method3: Rotate The Gear Behind The Ink Cartridge
The gear in question is linked to the roller that feeds paper. Discarded pieces of paper or other foreign items could get stuck within, making their location a challenge. Follow the steps below in order to perform this task successfully.
Step 1: Remove the scanner device from your Epson printer and power it off.
Step 2: To change gears, move the ink cartridges to the right, and then to the left.
Step 3: After that, shift into gear 5 or 6 times. Anything trapped here will be turned upside down.
Step 4: Turn the right gear twice or thrice more after turning on the printer. The ink cartridges will go back to where they came from.
Step 5: Finally, print a test page and close the printer lid.
Method4: Reset Your Epson Printer
Last but not the least, if even after performing all the three methods mentioned above you are still facing the same issue, the last option is to reset it. If you’re experiencing troubles with setup, network connection, or persistent error messages, a factory reset may be the solution. If you want to return your Epson printer to its original factory settings, follow these steps:
Step 1: Get your Epson printer set up and ready to go by turning it on.
Step 2: You may access the control panel’s “Setup” or “Menu” button.
Step 3: To enter service or maintenance mode, press and hold the “Setup” or “Menu” button for a few seconds until a message appears.
Step 4: Use the arrow buttons on the control panel to traverse the menu after you’re in maintenance mode. A “Factory Reset” or “Restore Default Settings” option should be accessible.
Step 5: “Factory Reset” or “Restore Default Settings” should be your preference. If your printer asks you to confirm the activity, just hit “OK” or something similar on the control panel.
Step 6: The printer will power back on automatically as it finishes. You may try turning it off and on by hand if that doesn’t work.
Step 7: After restarting the printer, you’ll need to reconfigure its settings.
Printing a sample page or document might serve as a test to make sure everything is functioning properly. This will let you know whether the reset fixed your problems.
Wrapping Up
We hope that the step-by-step instructions on how to fix paper jams on the Epson printer helped you resolve the issue. If you have problems with your Epson printer getting paper jams, try these fixes. If the issue still persists, take your Epson L3150 printer to it’s manufacturer or to a nearby repair shop. Additionally, you can share your thoughts about the methods we have shared in the comments section below.
