WiFi range extender is becoming the dead zone eliminator around the world. The Setek WiFi range extender is one of the internet signal boosters that extend the signals around home.
Here, you get to know about how to complete the Setek WiFi extender setup and log into the interface.
Setek Range Extender Setup
You should also check that the router is connected to modem network and fully configured using IP address .You can check by going in to the interface window from the computer.
Then, after checking the router is working fine, you should turn it off and then you can connect the Setek WiFi range extender via cable. You can also use the WPS method to connect.
Ethernet Cable
Insert the cable to the router LAN port and other end will go into the Ethernet port of the extender. Then, connect the extender to the wall socket and turn it on.
WPS Method
To connect, the extender to the router with the help of WPS method, you have to connect both the devices to power and press the WPS button on devices. The router and extender will connect with each other automatically.
Now, you should access the interface of the extender with the help of Local Web GUI interface.
Setek Range Extender Login
For MAC iOS
If you have a MAC Operating system laptop, then simple connect to the internet.
- Choose Safari web browser and search the IP address 192.168.10.1 and search.
- You will get to the interface login page, where you have to enter the Admin credentials.
- Use the label or the user manual, if you are doing it first time.
Enter the credentials and get to the interface window. Now, you can access all the features of the app.
For Windows OS
If you have a Windows Operating system laptop, then simple connect to the internet.
- Choose updated web browser and search the URL IP address 192.168.10.1 and search.
- You will get to the interface login page, where you have to enter the Admin credentials.
- Use the label or the user manual, if you are doing it first time.
Enter the credentials and get to the interface window. Now, you can access all the features of the Setek WiFi range extender.
So, above were the simple steps to the log in to the Setek WiFi range extender interface. Now, have a look troubleshooting tips to dispel any related technical problem to setup or login.
Troubleshooting Tips and Solutions
Optimal spot
Electronic devices can trouble you a lot if your place the routers or extenders or boosters near to the electronic devices.
You have to check that there is no interruption in the WiFi signals of the networking devices.
If router and satellite device is facing blockage in the signals, then find other location in your house, which should be optimal.
Reboot
- Navigate power button on the Setek extender device, hit it twice. First time, by pressing the button will turn it off and second time, it will reboot.
- The other one method to reboot the device is plug it out from the wall socket and plugs it in again.
Reset
Resetting the Setek extender will make it perform better, because this process deletes every set settings and data. Resetting the device will also dispel the problem.
- Find the RESET pinhole button on the Setek extender device.
- Press it for 5-10 seconds with the help of sharp object.
The reset process will start and after that you should do the setup again by accessing the interface.
The End Conclusion
Here, you have learned how to setup and configure the Setek WiFi range extender in different operating systems. Then, at the end, you have seen troubleshooting tips to dispel any problem.
